ENGINE
Cat C9 ACERT engine model
Gross power 170 kW 228 hp
Net power – Caterpillar 149 kW 200 hp
Net power – ISO 9249 149 kW 200 hp
Net power – EEC 80/1269 149 kW 200 hp
Net power – SAE J1349 148 kW 198 hp
Net power – DIN 70020 207 hp
Bore 112 mm 4.4 in
Stroke 149 mm 5.9 in
Displacement 8,8 L 537 in3
TRANSMISSION
Advance 1.0 3.8 kph 2.3 mph
Advance 2.0 6.6 kph 4.1 mph
Forward 3.0 11.5 kph 7.1 mph
Reverse 1.0 4.8 kph 3.1 mph
Reverse 2.0 8.4 kph 5.2 mph
Reverse 3.0 14.6 kph 9.1 mph
FILLING CAPACITIES
Fuel tank 424 L 112 gal
Cooling system 76.8 L 18.5 gal
Engine crankcase 28 L 7.4 gal
Power train 145.7 L 38.5 gal
Final drives (each) 13.6 gal 13.6 L 3.6 gal
Roller frames (each) 24.6 L 6.5 gal
Pivot Shaft Compartment 1.9 L 1.3 gal
Hydraulic Tank 51.5 L 13.6 gal
HYDRAULIC CONTROLS – PUMP
Pump capacity at 6900 kPa 1.001 lbs/in2
Speed in rpm at 2125 rpm
Rated engine speed
Pump output 217 L/min 57.3 gal/min
Lift Cylinder Flow 190 L/min 50.2 gal/min
Tilt Cylinder Flow 80 L/min 21.1 gal/min
Ripper Cylinder Flow 160 L/min 42.3 gal/min
HYDRAULIC CONTROLS – MAXIMUM OPERATING PRESSURE
Dozer Blade 19,300 kPa 2,799 lb/in2
Dozer blade tilt 19,300 kPa 2,799 in/lb2
Tilt Cylinder 19,300 kPa 2,799 lb/inch2
Ripper (left) 19,300 kPa 2,799 in/lb2
Ripper (tilt 19,300 kPa 2,799 lbs/in2
forward and backward)
Steering 40,000 kPa 5,802 lbs/in2
RIPPER
Type Fixed parallelogram
Number of cavities
Total width of beam 2202 mm 87 in.
Beam cross section 216 8.5 254 mm 10 in.
Maximum clearance, 511 mm 20.1 in. lifted (under the tip,
with pin in bottom hole)
Maximum penetration 500 mm 19.7 in.
Max. penetration force 6603 kg 14,557 lb
Breakout force 9134 kg 20,137 lb
Weight – with one shank 1634 kg 3,606 lb
Each additional shank 74 kg 163 lb
